5.1.20:
• new Wet Bulb Temperature variable
• option to use buffered connection for fetching meteogram
• added Italian translation back (it is now up to around 52% complete, and improving)
5.1.19:
• allow multiple location changes within the revert interval triggered from the location button on the widget
• allow a combination of location and time changes triggered from their respective widget buttons
5.1.18:
• fix for crash seen on some older Android devices
5.1.19:
• allow multiple location changes within the revert interval triggered from the location button on the widget (with detect location active)
• allow a combination of location and time changes triggered from their respective widget buttons, with both changes being reverted independently
5.1.18:
• fix for crash seen on some older Android devices
• other miscellaneous internal changes
• updated translations
5.1.17:
• internal changes to the way in which manual widget updates are triggered
5.1.12:
• update/improve appearance of the new-style Sliders in the settings page
• possible fix for system colour scheme and light/dark mode not loading properly sometimes
5.1.11:
• updated styling of slider UI elements
5.1.10:
• "custom" option for grid interval (in Time Settings section)
• could e.g. have just a single grid line at midday each day, or anything you like
5.1.9:
• option to plot moon phase as a line on the chart
• button to restore the original order of sections on settings page
5.1.11:
- updated styling of slider UI elements
- updated translations
- bugfixes
5.1.10:
- "custom" option for the grid interval (in Time Settings section)
- this allows complete flexibility for the hours grid lines... could e.g. have just a single grid line at midday each day, or ones at [0, 3, 9, 18], or whatever
5.1.9:
- Moon Phase variable, for plotting moon phase (or illumination) on the chart itself
- button in General Settings to restore the original order of sections on settings page
5.1.10:
- new "custom" option for the grid interval (in Time Settings section)
- this allows complete flexibility for the hours grid lines... could e.g. have just a single grid line at midday each day, or ones at [0, 3, 9, 18], or whatever
5.1.9:
- new Moon Phase variable, for plotting moon phase on the chart itself
- strictly speaking this is the moon *illumination* rather than *phase*
- new button in General Settings to restore the original order of sections in the settings page
5.1.9:
- new Moon Phase variable, for plotting moon phase on the chart itself (at present this is only available as the current value in the header)
- strictly speaking this is the moon *illumination* rather than *phase* (and may be renamed in future if there is any confusion)
- new button in General Settings to restore the original order of sections in the settings page
5.1.8:
- if a new API key is generated on one device it will now sync across to your other devices too
5.1.7:
- the background of the splash screen for the app (or full screen widget) now follows the app theme (dark/light)
5.1.6:
- new API Key section in the settings, for generating an API Key for use on the Meteograms API page (instead of the account hash or email address which has been used on that page until now)
5.1.5:
- cumulative values for Precipitation and Snow
- option to place the header at the bottom
5.1.4:
- show one or more weather symbols in the Header
- new weather symbols sets
5.1.5:
- new options for Precipitation and Snow to plot cumulative values
- emphasise section title of enabled section in settings page by giving it a bold font style
- new option to place the header at the bottom, below the chart area (at which point it might be better called a footer!)
5.1.4:
- option to show one or more weather symbols in the Header
- variants of the yr.no weather symbols set: (a) light mode; (b) dark mode; and (c) shadows
5.1.4:
- new option to show one or more weather symbols in the Header (one for each hour from now)
- new variants of the yr.no weather symbols set: (a) light mode; (b) dark mode; and (c) shadows
- "light mode" variant is similar to the existing "Yr.no V6" set
- "dark mode" variant is more suited to charts that have a darker theme, since it lightens up certain features to make them more visible
- "shadows" variant is a good all-rounder, having a light border surrounded by a darker shadow
5.1.3:
- new option in Chart Style section to control whether to force whole grid spacings at top and bottom (default is yes)
- when disabled, the min/max padding values are not subject to uncertain changes based on the calculated grid spacing
- new option in Chart Style section to control whether to force grid lines to show for at least one series (default is yes)
• option in General Settings section to show Upgrade section even if already upgraded (e.g. to allow a switch to a different type)
5.1.2:
• new "bar" visualisation feature for each weather variable
• this has a horizontal bar format similar to the weather bar etc
• the colouring in the bar is based on the defined gradient colour scale
• choose where to place the bar feature: in the plot area (adjustable), title area, top/bottom axis label area, and even in the wind arrows area
• note that this a platinum-only feature
• plus: similar placement options for all the other bar features, e.g. weather bar
5.1.1:
• add meteoblue as a new choice of provider (at least for a trial period; not all available parameters yet added)
• option within each section to use the line colour for the axis labels (including a colour scale type of line colour)
• option to use colour version of emoji symbols in the header rather than plain version
• emoji symbols are shown in the header if added as part of a custom prefix
• plain versions can follow the text colour whereas the colour versions have fixed colours
5.1.0:
• update codebase to target Android 14, and also update various other internal libraries
• improve logic for refreshing of widget just before and after the widget sleep time
• show a more meaningful estimate for the next widget refresh time in the App Info section
• option to limit the number of providers shown in the header (primary only, and overall maximum number)
• option to show tide and wave heights in centimetres (cm)
5.0.13:
• custom horizontal lines for each variable
5.0.13:
• add any number of custom horizontal lines for each variable
• for example, place one at a temperature of 30°C as a visual reference for "hot" temperatures
• or place one at a wind speed of 15 m/s to represent a threshold for "windy" conditions
5.0.12:
• for tide and sun/moon/planet elevation lines: show the time and value in the min/max label, or just the value, or just the time
5.0.11:
• new choices for how to combine data values from the primary and secondary sources
5.0.8:
• when choosing a provider for a specific variable, rather than just showing "Main Data Provider" in the drop-down it will also show what the currently-selected "main data provider" actually is
• this should help because the main data provider is set in different section, and you may not recall what it is currently set to
5.0.7:
• add "inch" as an option for precipitation unit
• fix email app not opening for some users
5.0.6:
• add millibar (mb) as a choice for pressure unit
5.0.6:
• add millibar (mb) as a choice for pressure unit (same as hPa but some may have a preference for the "mb" suffix over "hPa" when displayed in the chart)
5.0.5:
• new option in the Chart Style section to darken the theme when the app is in dark mode
• control whether the app is in dark mode via the "App theme" option in the General Settings section
• if that setting is set to "System" then the meteogram will switch to a darker variant when the device itself switches to dark mode
5.0.1:
• new Sea Temperature forecast variable (source: Foreca)
• Foreca has also been added to the list of sources which provide data in the AQI (Air Quality Index) section
• this is a global source of hourly AQI data up to three days ahead
• for this source to show in the provider list, first set the Index to "US EPA"
5.0.0:
• no longer supported on Android 4 devices (the minimum is now Android 5)
• new options for sun/moon/planet elevation/azimuth in the header
4.9.12:
• new source for AQI Index: the Copernicus Atmosphere Monitoring Service (CAMS)
• note that the current values in the header are always from aqicn.org (i.e. not linked to the choice for the AQI Index variable)
• in the Weather Data Provider section, show info for secondary provider as well as primary
• new status page: https://status.meteograms.com/
4.9.11:
• GEM model from Canadian Meteorological Centre
• GFS/HRRR models from NOAA
• GSM/MSM models from Japan Meteorological Agency
4.9.10:
• the HIRLAM model from FMI was discontinued at the end of October 2022, so this has been removed from the list of available providers in the settings
• instead, FMI now provides data from ECMWF, and this has now been added as a provider to replace the removed HIRLAM model
4.9.8:
• added information about translation progress with a link to the translation site
4.9.7:
• many more available fonts
• allow language to be changed via the per-app language system settings in Android 13
4.9.5:
• add runtime permissions request to show notifications (required for Android 13)
4.9.4:
• new source for wave data... DWD (choose Open-Meteo as provider in Wave Height and Direction section)
• compared to the existing wave data (Wave Watch III from NOAA), the DWD data covers inland bodies of water such as the Baltic, Mediterranean and Black Seas
• can plot both sources together or combine via averaging
4.9.0:
• option to show both primary and secondary data sources at the same time
4.9.4:
• new source for wave data... DWD (choose Open-Meteo as the provider in the Wave Height and Direction section)
• compared to the existing wave data (Wave Watch III from NOAA), the DWD data covers inland bodies of water such as the Baltic, Mediterranean and Black Seas
• can plot both sources together or combine via averaging
• added a separate section for Wave Direction
• update app to use Android 13 SDK
4.9.0:
• option to show both primary and secondary data sources at the same time
4.9.3:
• option to add a custom prefix to each header item to help distinguish them from one another
• added "30 seconds", "2 minutes" and "3 minutes" choices for the revert interval drop-down menus
4.9.2:
• show info (when relevant) about how the presence of a VPN (e.g. due to operation of ad-blocker app) might lead to unreliable updating of widgets
• further improvements to handling of widget updating
4.9.0:
• option to show both primary and secondary data sources at the same time
4.9.0:
• new option to show both primary and secondary data sources on the chart at the same time (pro only)
• this allows a direct visual comparison between two different sources
• enable this globally in the Weather Data Provider section or customise separately for each variable
• option to control fill between primary and secondary lines
• option to merge the two lines to an average line when the difference is below a certain value
• improved performance of averaging feature
4.7.24:
• set various axis-related options (e.g. axis min/max, axis padding, etc) either independently or (as before) linked to a related axis
• e.g. set up snow differently to rain
• option for fixed spacing between grid lines / axis labels
• option to enable/disable grid lines
• option to show all axis labels (or just those in range)
• option to shift axis labels left/right to fine-tune
• fix showing of notification after a device restart
• fix widget not reverting to detect location
4.7.20:
• new drag/drop functionality in the main settings page to allow you to change the order of the sections
• swipe sections left/right to remove them entirely (with "undo" feature)
• re-instate removed sections in the General Settings section
• new "colour scale" option for precipitation/snow probability and wind speed/gust (e.g. red for high values and green for low values)
• drag/drop to re-order colour scale items, and swipe to remove
• scale values now change based on chosen unit
4.7.15:
• option in Time Settings to trim time range with no data (the default)
• when shifting the time range using the widget buttons, it can be useful to shift by the full amount even if the final time range is partially blank, to maintain the expected time range showing in the chart
4.7.14:
• new data source by popular demand... Foreca!
• 14 days of data (hourly resolution for 7 days, then three-hourly)
• first three hours has 15-minute resolution, and is updated several times per hour
4.7.14:
• trial of new platinum data source: Foreca
• (if you think this source would be worth retaining, please get in contact... or else it will likely be dropped after the trial period)
• link added in Weather Data Provider section to a page which lists the weather variables that are available for each data source
4.7.13:
• prevent the app popping to the foreground again
4.7.11:
• new free data source: Open-Meteo.com
4.7.10:
• new free data source: here.com
4.7.13:
• prevent the app popping to the foreground again when dismissing a window opened from the widget (if the app was only put to the background previously rather than actually closing)
4.7.11:
• new free data source: Open-Meteo.com
• UI improvement: mark the currently-selected favourite in the favourite locations dialog
4.7.10:
• new free data source: here.com
• remove unnecessary permissions
4.7.12:
• updated internal dependencies
4.7.11:
• new free data source: Open-Meteo.com
• UI improvement: mark the currently-selected favourite in the favourite locations dialog
4.7.10:
• new free data source: here.com
• remove unnecessary permissions
4.7.9:
• fix bug in the country code field
• remove maps dependency
4.7.8:
• fix for custom colour settings not showing for header warning group
4.7.7:
• enable choice of primary/secondary data provider for "fog" and "cloudiness by height"
4.7.11:
• new free data source: Open-Meteo.com
• minor UI improvement: mark the currently-selected favourite (if any) in the favourite locations dialog
4.7.10:
• new free data source: here.com
• remove unnecessary permissions
4.7.9:
• fix bug in the country code field
• remove maps dependency
4.7.8:
• fix for custom colour settings not showing for header warning group
4.7.7:
• enable choice of primary/secondary data provider for "fog" and "cloudiness by height"
4.7.10:
• new free data source: here.com
• remove Advertising ID permission... was added automatically when updating the app to Android 12... not needed in this app
4.7.9:
• fix bug where the country code field in the Location section was being populated with the longitude
• remove maps dependency
4.7.8:
• fix for custom colour settings not showing for header warning group
4.7.7:
• enable choice of primary/secondary data provider for "fog" and "cloudiness by height"
4.7.9:
• fix bug where the country code field in the Location section was being populated with the longitude
• remove maps dependency
4.7.8:
• fix for custom colour settings not showing for header warning group
• minor styling tweaks
• internal dependency updates
4.7.7:
• enable choice of primary/secondary data provider for "fog" and "cloudiness by height"
4.7.6:
• updated translations (mainly Spanish)
4.7.5:
• fix settings page glitch where section content sometimes fails to show
4.7.3:
• updated dependencies (e.g. Material 3 styling library)
4.7.2:
• add link in Support section to a new support channel on Discord
• new option in Advanced Settings section to assume that there is a connection to an unmetered network (e.g. WiFi) at all times (usually this would be disabled... only enable when troubleshooting a problem with widget auto updating)
4.7.0:
• updated styling in settings page
4.6.20:
• choose whether to display lines and time labels for individual twilight stages (Sunrise and Sunset section)
• choose twilight stage for the transition between "day" and "night" (in Advanced Settings section)... this affects the day/night transition for the cloudiness/clearness plots and for the weather symbols
• fix for upgrade message being shown for valid platinum users
4.7.0:
• updated styling in settings page
4.6.20:
• choose whether to display lines and time labels for individual twilight stages (Sunrise and Sunset section)
• choose twilight stage for the transition between "day" and "night" (in Advanced Settings section)... this affects the day/night transition for the cloudiness/clearness plots and for the weather symbols
• fix for upgrade message being shown for valid platinum users
4.6.19:
• new data source: Pirate Weather (with data from NOAA)
• for the continental US, southern Canada, and northern Mexico, the first 48 hours is from the High Resolution Rapid Refresh (HRRR) model, with a spatial resolution of 3km and a time resolution of 15 minute
• for the rest of the world, the first 48 hours is from the Global Forecast System (GFS) model, with a spatial resolution of 18 km
• after the first 48 hours, data for all locations comes from the GFS model
4.6.16:
• new option in Time Settings section to choose whether to start the chart at the previous whole hour (the current default), or at exactly "now" (even if part-way through an hour)
• this option is only visible when the chart is set to start at 0 hours from now
• most useful when displaying a small number of hours... otherwise the effect may not be noticeable
previous:
• searchable settings (both titles and content)
• Custom Index feature: combine variables to create your own index
4.6.13:
• settings sections now open into a separate page (rather than within the main page)
• plus: filtering is now also possible within the section content (using the filter function accessed via the top App Bar)
• hit the back button to return to the main page
• most sections have been migrated fully... more to follow
• also: potential fix for occasional subscription message glitch
previous:
• Custom Index feature: combine variables to create your own index
4.6.11:
• new Custom Index feature: combine variables to create your own index!
• for example, define what weather parameter ranges you think are ideal for cycling, and the custom index will tell you when conditions are suitable
4.6.10:
• plot a custom horizontal band for any variable at a specified pair of values
• this highlights an interval of interest and acts as a visual guide to convey scale
• can plot a single horizontal line by setting one value and leaving the other at the default
4.6.10:
• plot a custom horizontal band (bounded by a pair of horizontal lines) for any variable at a specified pair of values (upper/lower bounds)
• this highlights an interval of interest and acts as a visual guide to convey scale even without min/max or axis labels
• can plot a single horizontal line by setting one value and leaving the other at the default of '-' (or leave blank)
4.6.8:
• new search/filter feature for settings page
• plus an overall change in style
4.6.9:
• minor tweaks and fixes
4.6.8:
• new search (filter) feature in the settings page
• look in the three-dot menu in the top bar
• this filters based on section titles (not section content) but in future it is hoped the filter will extend to setting labels too
• plus an overall change in style for the settings page
4.6.5:
• fix for occasional incomplete widget content
previous:
• ClimaCell renamed to Tomorrow.io
• publish via App Bundle
• new pressure unit: kPa
• complete Dutch translation
• option to add a "trend line" to the temperature plots
• the time range for the trend line is set in the Common Temperature Settings section
• option in General Settings to disable progress messages in the widget for routine (auto) updates or manual updates (e.g. top-left update or resize)
4.6.4:
• ClimaCell renamed to Tomorrow.io
4.6.3:
• publish via App Bundle
4.6.2:
• new pressure unit: kPa
• complete Dutch translation
4.6.1:
• option to add a "trend line" to the temperature plots
• the time range for the trend line is set in the Common Temperature Settings section
• option in General Settings to disable progress messages in the widget for routine (auto) updates or manual updates (e.g. top-left update or resize)... now disabled by default for routine (auto) updates
4.5.0:
• new global model choice from DWD: ICON GLOBAL (platinum only)
• new variable: Snow Depth (available from the DWD ICON models)
previous:
• new variables (DWD ICON-EU/D2 only): Lightning Potential Index (LPI) and Convective Available Potential Energy (CAPE)
• list the various models (e.g. ICON-EU, ARPEGE, HIRLAM) as separate providers
• improved precipitation daily totals labels
• show twilight stages: actual, civil, nautical, astronomical
• preset to mimic AIX weather widget
4.4.9:
• fix missing alpha and hue sliders in colour picker on first opening
previous:
• option to show precipitation daily totals in same style as min/max labels
• allow default gridline spacing to be *reduced* as well as increased
• two-stage location permission request for Android 11
• "update widget in foreground" and "active location detection"
• complete Czech translation
• show twilight stages: actual, civil, nautical, astronomical
• preset to mimic AIX weather widget
4.4.6:
• internal cleanup (remove redundant widget refresh triggers)
previous:
• allow default gridline spacing to be *reduced* as well as increased
• two-stage location permission request for Android 11
• "update widget in foreground" and "active location detection"
• complete Czech translation
• widget auto updating improvements
• show twilight stages: actual, civil, nautical, astronomical
• preset to mimic AIX weather widget
4.4.1:
• fix load/save function and widget load for Android 4.3 and below
4.4.0:
• new pro/platinum option to add coloured bands on the chart to show different twilight stages of sunrise and sunset: actual, civil, nautical, astronomical
• enable these twilight bands in the "Sunrise and Sunset" section
• can also show exact twilight timings on the chart by enabling "Sunrise and Sunset Lines" in the same section
• option also to show exact twilight timings in the Header Information section
• new pro/platinum option to add coloured bands on the chart to show different twilight stages of sunrise and sunset: actual, civil, nautical, astronomical
• useful for photographers and in countries having short daylight but long twilight
• enable these twilight bands in the "Sunrise and Sunset" section
• can also show exact twilight timings on the chart by enabling "Sunrise and Sunset Lines" in the same section
• option also to show exact twilight timings in the Header Information section
4.3.11:
• expose account hash (in General Settings section) so that it can be copied and used as the API token on the api.meteograms.com page (for platinum users)
• add link to privacy policy in the App Info section
• make "detect location" the default for new installs
• change location permission request workflow
• updated Russian translations
recent:
• colour overlay to compare today's temperature with yesterday's
• option to increase/decrease y-axis grid line spacing
4.3.10:
• option to show a colour overlay to compare today's temperature with yesterday's
• allows you to get a quick feel for whether today will be colder or warmer than yesterday
• will take time for first 24 hours to populate for a new location
4.3.1-9:
• option to increase/decrease the y-axis grid line spacing
• colour scale for dew point and ground temp
• Ground Temperature
• ICON-EU, COSMO-D2 and ICON-D2 (DWD)
• AROME and ARPEGE (Météo-France)
• HIRLAM and HARMONIE (FMI)
4.3.8:
• internal performance enhancements
4.3.7:
• option to enable "standard colour scale" for dewpoint and ground temperature lines
4.3.1-6:
• new variable: Ground Temperature (from ICON-EU and COSMO-D2 models only)
• new weather models: ICON-EU, COSMO-D2 and ICON-D2 (from DWD)
• new weather models: AROME and ARPEGE (from Météo-France)
• new weather models: HIRLAM and HARMONIE (from FMI)
4.3.6:
• new variable: Ground Temperature (from ICON-EU and COSMO-D2 models only)
4.3.5:
• new weather models: COSMO-D2 and ICON-D2 (from DWD)
• covering Germany and neighbouring countries e.g. Austria, Switzerland, Benelux, France and Italy
• COSMO-D2 has a resolution of 2.2 km
• ICON-D2 will later replace COSMO-D2
• new model: ARPEGE (Météo-France), covering Europe with a resolution of 11 km
4.3.1-4:
• new models: ICON-EU (DWD), AROME (Météo-France) and HIRLAM and HARMONIE (FMI)
4.3.5:
• new weather models: COSMO-D2 and ICON-D2 (from DWD)
• COSMO-D2 covers mainly Germany but also extends to neighbouring countries like Austria, Switzerland, Benelux and some of France and Italy
• COSMO-D2 has a resolution of 2.2 km up to 45 hours ahead
• ICON-D2 will later replace COSMO-D2
• also a new Météo-France model: ARPEGE, covering Europe up to 114 hours ahead with a resolution of 11 km
4.3.1-4:
• new models: ICON-EU (DWD), AROME (Météo-France) and HIRLAM and HARMONIE (FMI)
4.3.3:
• new variable: Planetary K-Index
• this index characterizes the magnitude of geomagnetic storms
• forecast values are available for up to three days from now
4.3.2:
• new DWD data source: ICON-EU, covering the whole of Europe
• this model has a high spatial resolution, with a grid spacing of 6.5 km
• the existing DWD model (MOSMIX) is based on ICON-Global (grid spacing of 13 km) and ECMWF
4.3.1:
• new model choices: HIRLAM and HARMONIE (from the Finnish Meteorological Institute)
4.3.2:
• new DWD data source: ICON-EU, covering the whole of Europe
• this model has a high spatial resolution, using a grid spacing of 6.5 km
• the existing DWD model (MOSMIX) is based on ICON-Global (grid spacing of 13 km) and ECMWF
• due to the amount of server resource and processing required, this is a platinum-only source
4.3.1:
• new free provider: Finnish Meteorological Institute (FMI) with two model choices: HIRLAM and HARMONIE
• The Weather Company now has up to 15 days of data
4.3.1:
• new provider: Finnish Meteorological Institute (FMI)
• two models to choose from: HIRLAM and HARMONIE
• HIRLAM covers all of Europe (plus a little)
• HARMONIE covers the Nordic region (plus a little)
• string replacement (search and replace) feature for weather summary in header, to remove useless text (e.g. to replace "Expect dry conditions over the next six hours" with just "dry for six hours")
• and also for the provider text (e.g. change "weat" to "TWC" or even just "wx")
• trial of enhanced package for The Weather Company (weather.com)
• hourly data up to 15 days ahead (currently only 2 days ahead)
• and sub-integer resolution on the variable values
• plus...
• for the standard colour scale (temperature, feels like, UV) the fill can now be switched to a horizontal gradient, with coloured bands that correspond to the values under the curve
• new option for header precipitation to choose between cumulative value over chart period, or the "now" value
4.2.5:
• warning threshold options for feels like and dew point
• option (in Time Settings section) to centre day labels within their respective days
• new custom date format codes: use %q for S M T W T F S and %Q for Su Mo Tu We Th Fr
4.2.1-4:
• option to show a label for the "now" point
• alternative to showing the "now" value in header
• "alerts bar" feature (platinum only)
• accuweather data source shows up to 72 hours of data
• additional background colour for just the plot area
4.2.4:
• option to show a label for the "now" point
• this is effectively an alternative to showing the "now" value in the header
• doing this enables "now" values to be shown even if you are not using a header at all
• to prevent overlapping labels as a result, disable the "overlapping labels" option in Chart Style
4.2.1-3:
• additional background colour for just the plot area
• "alerts bar" feature (platinum only)
• accuweather data source shows up to 72 hours of forecast data
4.2.0:
• previously, notifications (including temperature values in the status bar) required the presence of an associated widget
• now you can enable notifications also for the app, even in the absence of any widget
• the notification can even include a meteogram image, which can be viewed direct from the notification drawer
• changes to notification channels
4.1.0:
• allow user to grant location permission "only when using the app"
4.0.0:
• remove storage-related permissions
4.2.0:
• previously, notifications (including temperature values in the status bar) required the presence of an associated widget
• now you can enable notifications also for the app, even in the absence of any widget
• the notification can even include a meteogram image, which can be viewed direct from the notification drawer
• changes to notification channels
4.1.0:
• allow user to grant location permission "only when using the app"
4.0.0:
• remove storage-related permissions
4.0.0:
• this version removes all storage-related permissions
• settings files are now stored by default in a dedicated app-specific folder on the device, not in general storage
• the app only has general read/write access to this app-specific folder, and nowhere else on the filesystem
• but you can override this default behaviour, to enable settings files to be stored to and retrieved from elsewhere on filesystem via the system filepicker
• see the App Info section for more details
3.12.2:
• fix for shift function not working when set to "do not revert"
3.12.1:
• fix for occasional blank widget
• fix for adding multiple locations to favourites
3.12.0:
• single slider for setting chart hours range, with two slider controls
• option to enable viewing of all available data in full screen (including historical) even if not shown in widget
• fix for using the left/right middle "shift" buttons and then saving settings would make shifted time permanent
3.11.4:
• drop-down list of providers within each weather variable section now shows only those providers that can actually provide that weather variable
• fix overlap of actionbar with chart in app (particularly in landscape orientation)
• general performance improvements under the hood
• weatherbit is also back up and running after a period of downtime
3.10.0:
• option in Time Settings section to show full days (from midnight to midnight)
3.11.4:
• drop-down list of providers within each weather variable section now shows only those providers that can actually provide that weather variable
• fix overlap of actionbar with chart in app (particularly in landscape orientation)
• general performance improvements under the hood
• weatherbit is also back up and running after a period of downtime
3.10.0:
• option in Time Settings section to show full days (from midnight to midnight)
3.11.0:
• drop-down list of providers within each weather variable section now shows only those providers that can actually provide that weather variable
• fix overlap of actionbar with chart in app (particularly in landscape orientation)
• general performance improvements under the hood
• weatherbit is also back up and running after a period of downtime
3.10.0:
• option in Time Settings section to show full days (from midnight to midnight)
3.10.0:
• option in Time Settings section to show full days (from midnight to midnight)
• this provides a fixed time window of an integer number of full days, optionally starting on a *previous* day
• note that any data from the past must be collected over time, and will not be available immediately for a new location
• as time goes on, this historical part of the chart should fill up for your chosen location
• may not work yet for all data providers
3.9.0:
• trial of new weather data provider (requires platinum): ClimaCell
• new pollen variables (data from ClimaCell): tree pollen, weed pollen and grass pollen
• note that pollen data is not available for all locations
• new Air Quality Index (AQI) variable (data from ClimaCell)... plot AQI forecast (not just value in header)
• fix message shown in weather variables sections when paid provider is selected and legacy credits still remain
3.8.10-12:
• bugfixes and internal improvements
3.8.9:
• fix crash on clicking help link
• fix language change in settings (was always using device language)
• internal improvements
3.8.8:
• fix problem with widget updating
3.8.7:
• fix widget buttons for widgets with rotation enabled
3.8.6:
• can set a time window for the "warnings" in the Header Info section
• "show warning above" setting in precipitation probability section
• search box added to map-based place picker
3.8.7:
• fix widget buttons for widgets with rotation enabled
3.8.6:
• can set a time window for the "warnings" in the Header Info section (set to zero to use whole meteogram range)
• "show warning above" setting in precipitation probability section
• search box added to map-based place picker, so can use a combination of text search and map search
• bottom panel of map-based place picker follows app day/night theme
3.8.6:
• set a time window for the "warnings" in the Header Info section (set to zero to use the whole meteogram range)
• "show warning above" setting for the precipitation probability variable
• search box added to map-based place picker, so can use a combination of text search and map search
• fix map picker bug (selected location not sticking)
• bottom panel of map-based place picker follows app day/night theme
3.8.4:
• option in temperature part of Header Information section to display min and/or max for next 24 hours (relative to start of chart)
3.8.1:
• slider controls for changing "line width", "fill opacity", "padding", and more
3.8.0:
• more consistent styling and improved handling of night/day mode
3.7.14:
• use the truncated location name in the notification as well as in the meteogram header itself
• option to include a meteogram in the notification... visible in smart watch notification
3.8.2:
• internal changes (widget auto updating)
3.8.1:
• slider controls for changing "line width", "fill opacity", "padding", "arrow size", "hours", "z index" values (and more)
3.8.0:
• more consistent styling and improved handling of night/day mode
3.7.14:
• use the truncated location name in the notification as well as in the meteogram header itself
• option to include a meteogram in the notification... should be visible in smart watch notification
3.7.11:
• prevent flash of light theme before loading dark
• improvements to widget auto updating
previously:
• new "system" option for "app theme" so that dark mode is controlled based on system setting
• truncate weather alerts in header
• irradiance type: direct, global, average, relative, net
• KNMI source
• Carbon Intensity
• MeteoGroup source with:
• cloud base height, freezing rain and convective precipitation probabilities
• snowfall probability, freezing level, snow altitude
3.7.6:
• fix auto update issue experienced by some
• fix location permission denied message
3.7.5:
• select irradiance type (MeteoGroup): direct, global, average, relative, net
• new variables (MeteoGroup): cloud base height, freezing rain probability, convective precipitation probability
3.7.4:
• KNMI data source
• set METAR station ID directly
3.7.2-3:
• Carbon Intensity variable
3.7.0:
• MeteoGroup data source
• parameters: snowfall probability, freezing level, snow altitude
3.7.4:
• new weather data provider: KNMI (Netherlands and nearby only)
• new option to set the METAR station ID directly
3.7.2-3:
• new Carbon Intensity variable
• bugfix for favourite locations not being preserved when saving/loading settings
3.7.1:
• font size option for wind values in wind arrows block
• failure message identifies problem data source
3.7.0:
• trial of MeteoGroup data source
• new parameters: "snowfall probability", "freezing level", "snow altitude"
3.3.0:
• choose from 16 different "slots" into which to save your settings on the server
• (this allows multiple different setting groups to be stored on the server)
• "ignore location" checkbox control for both saving and loading settings
• (if ticked when loading settings, existing location settings are preserved)
• user-defined defaults (if any) are now used when creating a new widget
• new "Online Editor" button in Server section and new "Load from URL" button in Save/Load section
3.2.11:
• general improvements to header text positioning
• new option to centre the text within the header
• new option to change the size (scale factor) of the moon phase symbol
3.2.10:
• apply bolder font weight to header text
• colorise header variables individually
3.2.9:
• disable display of units in the header
• added a "warn above" option for wind speed gust
3.2.6:
• show wind direction in header
3.2.6:
• option to show wind direction (either angle or compass name or both) in the header
• fix location permissions for Android 10 (Q): when using "detect location" access is needed to location whilst in the background to enable auto updating of a widget
3.2.5:
• new weather data provider: The Weather Network
3.2.3:
• new weather data provider: Weatherbit
3.1.0:
• new *global* data provider: UK Met Office
3.2.5:
• new weather data provider: The Weather Network
3.2.3:
• new weather data provider: weatherbit.io
• "window" option for the precipitation min/max labels to bring it in line with other series
• display labels per 24 hours, per chart, per day/night, or based on significant turning points
• in addition, the column type for precipitation now works even for a non-linear time axis
• internal performance enhancements
3.1.0:
• new *global* data provider: UK Met Office
3.2.2:
• updated support libraries and bugfixes
3.2.1:
• the Dark Sky data now provides minute-by-minute time resolution for precipitation for the first hour
• this first-hour forecast is updated every 5 minutes by Dark Sky for up-to-date short-term rainfall predictions
• to be most effective, display a small number of hours and use the "cache bust" add-on
3.2.0:
• new "cache bust" add-on (in-app upgrade)
3.1.0:
• new *global* data source: UK Met Office
2.2.31:
• when the toolbar is hidden in the app (or fullscreen widget) the button on the chart is now a MENU button for showing the same menu that is available from the (now hidden) toolbar
• this way you can select from the full set of menu options without first having to show the toolbar (and then rehide it)
• plus: new option to show current cloudiness value in the header
2.2.27-30:
• mix and match... choose what data provider to use on a per-variable basis (pro version only)
2.2.29-30:
• new option to show current dewpoint value in header
• widget auto refresh fix
2.2.27-28:
• mix and match... choose what data provider to use on a per-variable basis (pro version only)
• separate font size settings for header text
• polar (circular) chart style -- see https://trello.com/c/PWomPW1S
• option to change landing page for windy.com link
• "day/night" and "turning points" choices for min/max labels
• option to show current Global Irradiance in the header
2.2.27-28:
• mix and match... choose what data provider to use on a per-variable basis (pro version only)
• separate font size settings for header text
• polar (circular) chart style -- see https://trello.com/c/PWomPW1S for example
• option to change the landing page for the windy.com link
• "day/night" and "turning points" choices for min/max labels "window" setting
• option to show current Global Irradiance in the header
• bugfixes (auto refreshing, temperature settings)
2.2.27:
• mix and match... choose what data provider to use on a per-variable basis (pro version only)
• separate font size settings for header text
• polar (circular) chart style -- see https://trello.com/c/PWomPW1S for example
• option to change the landing page for the windy.com link
• "day/night" and "turning points" choices for min/max labels "window" setting
• option to show current Global Irradiance in the header
• see App Info section for more further details on all the above
2.2.25-26:
• show government-issued weather alerts in the header
• currently only those from National Weather Service (US), Environment Canada, and MeteoAlarm (Europe)
• adaptive home screen icon
• fix background colour of navigation bar in windy.com window
2.2.23-24:
• new choice of data provider: weather.com (The Weather Channel)
2.2.21-22:
• rounded corners on widgets
2.2.17-18:
• show current particulate matter PM2.5 and PM10 values (etc) in the header
2.2.22:
• show rounded corners also in the live preview in settings
• handle blank corner radius value correctly
• prevent "upgraded" message appearing each time in settings
2.2.21:
• new option to give widgets rounded corners
• see Chart Style section to set the corner radius
2.2.19:
• prevent "process stopped" issue on Android 4 devices
2.2.17-18:
• show current particulate matter PM2.5 and PM10 values (etc) in the header
2.2.15-16:
• link to windy.com from widget
2.2.19:
• new version of support library to prevent "process stopped" issue on Android 4 devices
• translation updates
2.2.17-18:
• show current particulate matter PM2.5 and PM10 values in the header
• plus: Nitrogen Dioxide, Sulphur Dioxide, Carbon Monoxide, Ozone
• as well as an overall AQI (Air Quality Index) value
2.2.15-16:
• link to windy.com from widget and app, for animated wind, cloud, rain etc maps for that location
2.2.14:
• dedicated min/max colour pair for the min/max labels
2.2.18:
• more air quality values available in header: Nitrogen Dioxide, Sulphur Dioxide, Carbon Monoxide, Ozone
• as well as an overall AQI (Air Quality Index) value
• plus the ones from previous version: PM2.5 and PM10
2.2.17:
• show current particulate matter PM2.5 and PM10 values in the header
2.2.15-16:
• link to windy.com from widget and app, for animated wind, cloud, rain etc maps for that location
2.2.14:
• dedicated min/max colour pair for the min/max labels
2.2.17:
• show current particulate matter PM2.5 and PM10 values in the header
• these are measures of air quality
• this information is not available for all locations
2.2.15-16:
• link to windy.com from widget and app, for animated wind, cloud, rain etc maps for that location
2.2.14:
• dedicated min/max colour pair for the min/max labels
• set the width and shadow for the label boxes
2.2.14:
• option to use a dedicated min/max colour pair for the min/max labels (rather than using the line colour for both)
• this allows you to distinguish more easily between min and max points on a line
• enable this in the relevant section (e.g. Actual Temperature) and specify the colours in the Chart Style section
• plus new options (in Chart Style section) to set the border width and shadow for the min/max label boxes
2.2.2-11:
• internal performance improvements
• bugfixes in support libraries
2.2.1:
• new widget button (lower middle) to open a dialog for quickly changing the weather data provider direct from the widget (pro version only)
• and a corresponding menu item in the app's menu
• location permission bugfix
2.0.4:
• new option to convert pressure values from mean sea level values to local values
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.2.2-4:
• internal improvements
• bugfix in support library
2.2.1:
• new widget button (lower middle) to open a dialog for quickly changing the weather data provider direct from the widget (pro version only)
• and a corresponding menu item in the app's menu
• location permission bugfix
2.0.4:
• new option to convert pressure values from mean sea level values to local values
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.2.2:
• internal improvements
2.2.1:
• new widget button (lower middle) to open a dialog for changing the weather data provider without having to go into the settings (pro version only)
• and a corresponding menu item in the app's menu for quickly changing the data provider
• location permission bugfix
2.0.4:
• new option to convert pressure values from mean sea level values to local values
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.2.0:
• internal changes to widget updating procedures
2.0.4:
• new option to convert pressure values from mean sea level values to local values
• more reliable widget refresh after app update
• fix for occasional blank widget
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.1.0-3:
• internal changes to widget updating procedures
2.0.4:
• new option to convert pressure values from mean sea level values to local values
• more reliable widget refresh after app update
• fix for occasional blank widget
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.1.1/2:
• bugfixes
2.1.0:
• internal improvements to widget updating procedures
2.0.4:
• new option to convert pressure values from mean sea level values to local values
• more reliable widget refresh after app update
• fix for occasional blank widget
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.1.0:
• internal improvements to widget updating procedures
2.0.4:
• new option to convert pressure values from mean sea level values to local values
• more reliable widget refresh after app update
• fix for occasional blank widget
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.0.4:
• new option to convert pressure values from mean sea level values to local values (see the Pressure section)
• the conversion takes into account elevation and temperature at the location concerned
• more reliable widget refresh after app update
• fix for occasional blank widget
• other internal changes
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• alternative location lookup method where Google Play Services is not installed
2.0.3:
• fix settings crash with live preview on some Android 4.1 devices
2.0.1-2:
• use alternative location lookup method where Google Play Services is not installed
• continue overhaul of widget updating methods
2.0.0:
• update target sdk and major revision to support libraries used
• overhaul of widget updating methods
• custom unit conversion parameters for the GFS variable
1.11.32:
• new data provider: The Weather Channel (weather.com)
• this is only available on a trial basis
2.0.1-2:
• use alternative location lookup method where Google Play Services is not installed
• continue overhaul of widget updating methods
2.0.0:
• update target sdk and major revision to support libraries used
• overhaul of widget updating methods
• custom unit conversion parameters for the GFS variable
1.11.32:
• new data provider: The Weather Channel (weather.com)
• this is only available on a trial basis, and may be withdrawn at any time
2.0.0:
• update target sdk and major revision to support libraries used
• begin overhaul of widget updating methods
• custom unit conversion parameters for the GFS variable
1.11.32:
• new data provider: The Weather Channel (weather.com)
• this is only available on a trial basis, and may be withdrawn at any time
• if it is continued, it may be available to pro users only, and/or via the credit system
• for now, only the weather.com icon set is shown with this data
1.11.33-34:
• custom unit conversion parameters for the GFS variable
• internal improvements
1.11.32:
• new data provider: The Weather Channel (weather.com)
• this is only available on a trial basis, and may be withdrawn at any time
• if you have a strong interest in keeping this source, then get in contact
• if it is continued, it may be available to pro users only, and/or via the credit system
• for now, only the weather.com icon set is shown with this data
1.11.33:
• internal improvements
1.11.32:
• new data provider: The Weather Channel (weather.com)
• this is only available on a trial basis, and may be withdrawn at any time
• if you have a strong interest in keeping this source, then get in contact
• if it is continued, it may be available to pro users only, and/or via the credit system
• for now, only the weather.com icon set is shown with this data
1.11.31:
• option to define a third colour in the daylight and nightlight bands (previously limited to one or two colours)
1.11.24-30:
• new button in the settings page to toggle the live preview on and off quickly
• new options to set the width and colour of the vertical line separating one day from another
• new option to skip the "revert after" dialog after pressing the widget location button
• updated API for noaa.gov, including increased number of hours available
1.11.24-30:
• new button in the settings page to toggle the live preview on and off quickly
• this new button can itself be hidden via a setting in General Settings section
• new options to set the width and colour of the vertical line separating one day from another (Chart Style section)
• new option to skip the "revert after" dialog after pressing the widget location button (bottom left corner)
• updated API for noaa.gov, including increased number of hours available
• bugfixes
1.11.24-27:
• updated API for noaa.gov, including increased number of hours available
• internal improvements
1.11.20-23:
• improve loading sequence used in app
• quick link for Xiaomi users to enable "auto start"
1.11.17-19:
• new "live preview" in the settings page
• set font size for min/max labels independently of chart font size
• show tide station being used for tide chart
• mark high and low tide points with markers
• new shadow options
1.11.24-26:
• internal improvements
1.11.20-23:
• improve loading sequence used in app
• provide information to Xiaomi users regarding the need to enable "auto start", with a quick link to the relevant setting
1.11.17-19:
• new "live preview" in the settings page to make configuring your meteogram much easier
• set font size for min/max labels independently of chart font size
• show tide station being used for tide chart
• mark high and low tide points with markers
• new shadow options
1.11.20-23:
• improve loading sequence used in app
• provide information to Xiaomi users regarding the need to enable "auto start", with a quick link to the relevant setting
• bugfixes
1.11.17-19:
• new "live preview" in the settings page to make configuring your meteogram much easier
• set font size for min/max labels independently of chart font size
• show tide station being used for tide chart
• mark high and low tide points with markers
• new shadow options
1.11.21-22:
• show information to Xiaomi users regarding the need to enable "auto start", with a quick link to the relevant setting
1.11.20:
• bugfixes
1.11.17-19:
• new "live preview" in the settings page to make configuring your meteogram much easier
• set font size for min/max labels independently of chart font size
• show tide station being used for tide chart
• mark high and low tide points with markers
• new shadow options
1.11.21:
• show information to Xiaomi users regarding the need to enable "auto start", with a quick link to the relevant setting
1.11.20:
• bugfixes
1.11.17-19:
• new "live preview" in the settings page to make configuring your meteogram much easier
• set font size for min/max labels independently of chart font size
• show tide station being used for tide chart
• mark high and low tide points with markers
• new shadow options
1.11.14-16:
• can now display up to 168 hours of forecast data with darksky (previously 48 hours)
• fix bug when opening some settings sections (Turkish language only)
• update to geocoding methods
• fix widget disappearing when screen resolution is changed
1.11.13:
• display current UV index in header
• display a UV warning in the header
• display UV values in standard UV colour scheme or plain
• separate fog variable
• apply a fixed offset to the tide chart
1.11.14:
• update to geocoding methods
• fix widget disappearing when screen resolution is changed
1.11.13:
• display current UV index in header
• display a UV warning in the header when UV goes above a specified value
• display these UV values in standard UV colour scheme
• use standard UV colour scheme for the UV plot
• or use a plain-colour or gradient fill for the UV plot
• separate fog variable to plot
• apply a fixed time and/or height offset to the tide chart
1.11.13:
• display the current UV index in the header
• display a UV warning in the header (with expected UV value) when the UV goes above a specified value
• display these header UV values in the standard UV colour scheme
• use the standard UV colour scheme for the UV plot too
• or use a plain-colour or gradient fill for the UV plot
• separate fog variable to plot (which is just the fog part of the cloudiness by height data)
• apply a fixed time and/or height offset to the tide chart
1.11.11-12:
• can edit the colours used for the "standard colour scale" (in the temperature sections)
• and also for the colour scales used for the Indices Bar and Air and Pollen Bar
• for now you must manually edit hex colour values (one for each colour in the scale), but in future there will be a set of colour pickers for this purpose
• new "show every n'th label" option in Time Settings section to allow labels on the time axis to be skipped to increase spacing between them
1.11.10:
• new weather data provider: Deutscher Wetterdienst (dwd.de)
• this source is global, though accuracy and coverage is likely to be better in Germany and surrounding countries
• cloudiness-by-height (cloud layers) feature can now be displayed regardless of weather data provider being used
• if you are using a provider other than met.no, smhi.se or dwd.de for your main weather data then there may be a slight discrepancy between cloud layers data and the main forecast data
1.11.9:
• internal changes in preparation for changes to google APIs
• updated translations
1.11.8:
• for sunrise, sunset, moonrise and moonset times in the header, can now ask to show only the next event
• and for the above, can now ask to show the time as absolute (e.g. 20:52) or relative to now (e.g. +03.22) or both
• slight change in the logic for determining the short place name from the information returned from a detect location operation
• updated translations
1.11.8:
• for sunrise, sunset, moonrise and moonset times in the header, can now ask to show only the next event (rather than the next two)
• and for the above, can now ask to show the time as absolute (e.g. 20:52) or relative to now (e.g. +03.22) or both
• slight change in the logic for determining the short place name from the information returned from a detect location operation
• updated translations
1.11.7:
• increase default font size slightly
• fix occasional app crash for some Android 8.1 users (related to live wallpaper)
• updated support libraries
1.11.6:
• relax lower limit on widget size
• disable auto opening of Predefined Option Sets section
1.11.5:
• prevent resetting of account name each time settings loaded
1.11.4:
• simplified font options
• separate widget dimension correction factors for portrait and landscape
1.11.6:
• relax lower limit on widget size (so you can judge for yourself when the widget size becomes too small for the content!)
• auto opening of Predefined Option Sets section disabled by default
• updated translations
1.11.5:
• prevent resetting of account name each time settings loaded from file or server
1.11.4:
• simplified font options
• separate widget dimension correction factors for portrait and landscape
• option to disable auto opening of Predefined Option Sets section
1.11.5:• prevent resetting of account every time settings are loaded from file or server• internal changes in preparation for server migration1.11.4:• simplified font options: there is now a single set of font options rather than separate sets for webfonts• plus a wider range of font weights is now available for some of the fonts• separate widget dimension correction factors for portrait and landscape• option to disable auto opening of Predefined Option Sets section• bugfixes
Bonus mobilità 2020
1.11.3:• new options in Advanced Settings for correcting incorrect pixel dimensions reported by some launchers• change to auto opening of Predefined Option Sets section in settings• updates to internal libraries• bugfixes1.11.2:• minor improvements to Predefined Option Sets section• updated internal libraries• bugfixes (e.g. fix occasional UI crash)1.11.0:• new Predefined Option Sets section for quickly trying different meteogram designs
1.11.2:• minor improvements to Predefined Option Sets section• updated internal libraries• bugfixes (e.g. fix occasional UI crash)1.11.0:• new Predefined Option Sets section for quickly trying different meteogram designs• choose from a number of different designs, each with a thumbnail preview• new option in Sunrise and Sunset section to control vertical position of the sunrise and sunset label• improved handling of local chart generation for certain devices
1.11.0:• new Predefined Option Sets section for quickly trying different meteogram designs• choose from a number of different designs, each with a thumbnail preview• new option in Sunrise and Sunset section to control vertical position of the sunrise and sunset label• improved handling of local chart generation for certain devices1.10.32:• performance improvements1.10.31:• colour scale from Weather Bar can be used for precipitation plot too
1.10.32:• more effective cache clearing• minor UI fixes for older Android devices• bugfixes and performance improvements• updated translations1.10.31:• use colour scale from Weather Bar to colour precipitation plot too• customise the colours used in the Weather Bar• improved filter for file picker
1.10.31:• new feature: use the colour scale from the Weather Bar to colour the precipitation plot too• the precipitation plot will then indicate directly if precipitation is likely to be snow or rain, and persistent or scattered• related to this, you can now customise the colours used in the Weather Bar• changed filter for settings file picker to make settings files more reliably selectable• styling fix for Android 4.x devices where button background in dialog was same as button text
1.10.29:• bugfixes and performance improvements• updated to use latest libraries• disallowed installation on SD card again (too many negative consequences, and the app is small anyway)1.10.28:• two new menu options in the app (or fullscreen widget):•• (a) choose new location•• (b) force chart reload• general performance improvements
1.10.25:• new weather symbol set (pro version only): from yr.no, the Norwegian weather site associated with met.no1.10.24:• allow installation on the SD card... note that there are negative consequences for widgets when the SD card is unmounted (widgets will be removed and will not reappear until the SD card is remounted AND the device is rebooted)• updated in-app billing... please contact support if your in-app upgrade is not recognised or if in-app purchases are not working generally
1.10.20-21:• with local generation enabled (in General Settings) a small amount of past data is now cached and shown on the chart for context (pro version only)• customise the number of cached hours to be shown in the Time Settings section• customise the colour of the line and overlay that are used to distinguish past from present in the Time Settings section (make transparent to switch off entirely)• internal changes to widget updating methods
1.10.19:• new option (in the Day and Night section) to use a different colour for the daylight bands on a weekend• use this to distinguish more easily between weekend and weekdays• plus:• improved resiliency against local and remote caching issues• updated translations1.10.18:• improvements to file pickers for loading settings from a file
1.10.18:• improvements to choice of file pickers for loading settings from a file• there is an option to choose the standard file picker for your device (which may include the ability to load a file directly from Google Drive etc)• the internal file picker for the meteogram app has been updated a little, and now allows you to browse up to root level• updated translations
1.10.15:• bugfixes (crash on opening permissions dialog, progress messages on local widget not in chosen language)1.10.14:• offline mode: updating of widget and app now possible even with no network connection• needs "generate chart locally" to be enabled in General Settings section, or a web font (in Chart Style section)• the widget needs to have updated at least once to fetch the resources it needs for subsequent offline operation, and the weather data needs still to be "fresh"
1.10.14:• offline mode: limited updating of widget and app now possible even with no network connection• needs "generate chart locally" to be enabled in General Settings section, or a web font (in Chart Style section)• note: the widget needs to have updated at least once with the current settings to fetch the data it needs for subsequent offline operation, and the weather data needs still to be "fresh"
1.10.13:• average data used per meteogram refresh now shown in App Info section (based collectively on all widget and app refreshes; resets on each reboot)• fixed locally-generated widget on Android O causing problems during a refresh with keyboard and other user interactions• fixed erroneous permission denied message on Android O
1.10.11-12:• fix crash on opening settings screen on some devices1.10.10:• option to place min/max label on each grid line, as an alternative to per-chart and per-day options• most effective with label boxes and units disabled, and integer-only labels enabled to avoid too much clutter• other changes in view of Android O and to deal with disappearing widget in Pixel launcher• logcat button in Advanced Settings section (most useful when running a debug version)
1.10.10:• new option to place min/max label on each grid line, as an alternative to existing per-chart and per-day options• particularly effective when you disable label boxes and units, and enable integer-only labels (all in Chart Style section) to avoid too much clutter• plus internal changes (mainly in view of Android O and to deal with disappearing widget in Pixel launcher)• and logcat button in Advanced Settings section (most useful when running a debug version with extra logging)
1.10.9:• show Global Forecast System (GFS) data• choose from any of 168 different variables• for example, show Convective Available Potential Energy (CAPE) to provide an indication of severe weather (e.g. thunderstorms)• set a warning threshold to e.g. to warn in the header if the CAPE value rises above a certain value (as a warning of potentially severe weather)• some variables have different data at different heights, with the height being selectable in the app
1.10.8:• further improvements to performance of locally-generated widgets• prevent brief disappearance of widget during a refresh and improve timings generally during the refresh process• quicker loading and more efficient with more extensive use of cached resources• bugfix (in the app, the Show Toolbar button was not visible even after the Toolbar and menu is hidden)1.10.5:• option in General Settings section to generate widget content locally (i.e. on the device)
1.10.7:• further performance improvements1.10.6:• improved performance for locally-generated charts• quicker loading and more efficient with more extensive use of cached resources1.10.5:• option in General Settings section to generate chart locally (i.e. on the device)• for larger widgets, likely to lead to lower data usage• also helps to reduce server load and improve response times• due to issues on Android 7.1 and above, have re-introduced "overlay" permission to enable this
1.10.1:• the line separating historical data from forecast data is now customisable (in Time Settings section)• new option to specify whether to use the standard text colour or the line colour for the axis labels on the right-hand axis (Chart Style section)• internal changes to overcome the (already fairly high) technical limit on the number of options that can be changed from default• minor styling fixes
tecno Spark 2
